Posted in

How to increase the speed of robot joints?

When customers first reach out to me as a robot joints supplier, one of the most common questions is, “How can we make our robot arms move faster without sacrificing precision or durability?” It’s a question that crosses every industry we work with—from automotive assembly lines that need to keep up with high-volume production to packaging facilities where cycle times directly impact bottom lines. After 12 years in this business, I’ve learned that increasing joint speed isn’t about slapping a bigger motor on a robot and calling it a day. It’s a combination of targeted component upgrades, optimized design tweaks, and intelligent system integration. Let’s break down what actually works, based on the projects our team has supported over hundreds of deployments. Robot Joints

First, let’s talk about the core of any robotic joint: the transmission system. Most industrial robot joints use either harmonic drives, gearheads, or planetary gears to reduce motor speed to a usable range for the arm. A lot of people assume that to go faster, you just need a higher input motor speed—but that’s only part of the story. The transmission’s efficiency plays a huge role here. If your current gear system has high backlash or friction, even a fast motor will lose speed and energy as it transfers torque to the joint. That’s why we’ve seen so many customers switch from standard planetary gears to low-backlash, high-efficiency harmonic drives when they need more speed. Backlash, the tiny amount of play between gear teeth, might seem trivial, but it’s a silent killer of both speed and precision. When a joint has backlash, the robot has to “take up” that play before it can start moving in the correct direction—wasting valuable time that adds up over thousands of cycles. We worked with an automotive stamping client last year who was struggling to hit their 12-part-per-minute target; switching their 6 main joints from standard planetary gears to our precision harmonic drives cut backlash by 80% and boosted their cycle speed by 18% without any changes to their existing motors. That’s the kind of result that makes our clients’ day-to-day operations run smoother.

Next up, motor selection and tuning. It’s not just about how fast the motor can spin—it’s about how quickly it can accelerate and decelerate, because most robot joints spend less time at a constant high speed and more time ramping up and down. Brushless DC (BLDC) motors have become the go-to for high-speed joints because they don’t have the friction of brushed motors, allowing for faster acceleration. But even with a good motor, tuning the drive system to match the load is make-or-break. I’ve seen clients install a powerful BLDC motor on a joint only to have it overshoot its target position repeatedly, which actually slowed down their cycle because they had to add extra time for correction. The key here is load-matched torque curves. Our engineering team works with every customer to calculate the joint’s dynamic load (not just the static weight it moves) and match the motor’s torque output to that load. For example, a joint handling a 5kg payload doesn’t need a motor rated for 15kg— that extra power would make acceleration jerky and require more energy, while a motor that’s underpowered would struggle to reach the desired speed. Last quarter, a electronics assembly client came to us with a joint that was taking 0.8 seconds to move 30 degrees; we paired their existing BLDC motor with a custom torque profile tune that adjusted the acceleration ramp from 200 rad/s² to 350 rad/s², and that same 30-degree move now takes 0.5 seconds. No extra hardware, just smart tuning.

Then there’s weight reduction, and it’s not just about the joint itself— it’s about minimizing the mass the joint has to move. A lighter joint requires less torque to accelerate, which means you can run the motor at a higher speed without risking overheating or wear. We’ve developed high-strength, lightweight materials for our joints over the years: carbon fiber composites for external housing components instead of cast aluminum, and optimized aluminum alloy for internal gear structures that cut weight by 15% compared to standard designs. The catch here is that weight reduction can’t come at the cost of durability. We test every joint in our facility to 10 million cycles under load to make sure those lightweight components can stand up to industrial use. A friend in the aerospace industry told me about a project where they tried to use 3D-printed plastic for joint housings to save weight, but after 6 months of 24/7 operation, the plastic wore out and caused a joint failure. Our approach is different— we balance weight with material strength, so clients get the speed benefits without the downtime.

Friction is another often-overlooked factor that limits joint speed. Even small amounts of friction in bearings, seals, or gear surfaces can add up, especially at high speeds. We use two key strategies here: precision ceramic bearings instead of steel bearings, and advanced lubrication systems. Ceramic bearings are harder, smoother, and have less friction than steel, which reduces energy loss and allows for quieter, faster joint movement. We also apply a high-performance, low-viscosity synthetic lubricant to internal gear sets that maintains its properties even at high temperatures (something standard lubricants can’t do, which means they thicken and cause friction). A snack packaging client of ours was using steel bearings in their joints, and noticed that during long runs, their joint speed would drop by 10% because the lubricant heated up and thickened. Switching to ceramic bearings and our specialized lubrication brought that speed drop to less than 1%, even during 12-hour shifts. It’s a small change, but it makes a huge difference for round-the-clock operations.

Now, let’s talk about the control system, because no matter how good your hardware is, a slow or outdated controller will hold your joint speed back. Modern robot controllers use PID (Proportional-Integral-Derivative) tuning to adjust motor output, but if those parameters aren’t optimized for high speed, the joint will hesitate before moving. We work closely with automation integrators to help them tune controllers for our joints, focusing on reducing overshoot and minimizing response time. Another trick we’ve seen pay off is feedforward control, which predicts the required motor movement based on the joint’s path, instead of just reacting to position errors. For a robot moving in a continuous path—like applying adhesive to a box—feedforward control cuts cycle time by eliminating the small pauses the controller would use to correct position. A furniture assembly client used this method on their edge-banding robot joints, and their cycle time for each cabinet panel dropped from 45 seconds to 32 seconds, with no defects in the edge-banding.

Before you run out and start swapping out every part, there’s a critical reality check: increasing joint speed can’t be done at the expense of reliability. In our 12 years, we’ve had clients who came to us with stories of robot joints failing after just a few months of running at max speed, because they skipped the durability testing step. Every upgrade we recommend comes with a validation process: we test the joint under the customer’s exact load and speed conditions, monitor temperature, torque, and wear over hundreds of thousands of cycles, and make adjustments before we deliver it. We had a medical device client a few years ago who wanted a joint that could move 20% faster for their assembly lines; they had a tight deadline and wanted to skip testing, but we explained that cutting corners would lead to unplanned downtime that would cost them more in the long run. Instead, we sped up their validation process, ran the joint for 2 million cycles in our test lab in 10 days, and delivered a joint that hit their speed target and still has zero failures 2 years later. That’s the kind of partnership we build, not just selling parts, but making sure our joints work for our customers’ specific needs.

I know a lot of robot designers and integrators are under pressure to boost speed to stay competitive, but it’s important to approach it holistically. It’s not just about one part—it’s how the transmission, motor, materials, lubrication, and control system all work together. If you’re currently running joints that are underperforming for speed, take a step back and map out where the bottleneck is: is it backlash in the gears? Slow acceleration from the motor? Friction in the bearings? That’s where you start. We’ve worked with clients who only needed a lubrication upgrade to get the speed they wanted, and others who needed a full transmission and motor swap. There’s no one-size-fits-all solution, but there is a solution that fits your operation.

If you’re reading this and thinking “our robot’s joint speed is holding our production back,” I’d encourage you to reach out. Our team doesn’t just sell robot joints—we work with you to audit your current system, identify bottlenecks, and propose changes that will boost speed while keeping your robots running reliably. Whether you’re a small integrator with one robot or a large manufacturer with a line of 50 robots, we can tailor a solution that meets your needs. Don’t let slow joints be the reason your operation falls behind—let’s work together to get your robots moving faster, without the risk of downtime.

Stepper Motor References:

  1. Craig, J. J. (2005). Introduction to Robotics: Mechanics and Control. Pearson Education.
  2. Robotics Industries Association. (2022). Industrial Robot Joint Performance Standards. RIA Press.
  3. NASA. (2019). Lightweight High-Speed Joint Design for Robotic Manipulators. Journal of Robotic Systems.
  4. International Organization for Standardization. (2020). ISO 9283:2020 – Industrial Robots – Performance Criteria and Related Test Methods. ISO.

Hangzhou Zhongda Motor Co., Ltd.
We’re well-known as one of the most professional robot joints manufacturers in China, also support customized service. Please feel free to buy bulk high quality robot joints made in China here from our factory. Contact us for pricelist.
Address: NO 111.Dalingshan Road,Yinhu Street,Fuyang District,Hangzhou City,Zhejiang Rrovince,China.
E-mail: admin@hz-zhijue.com
WebSite: https://www.zdservo.com/